On the robustness of ultra-high voltage 4H-SiC IGBTs with an optimized retrograde p-well

The robustness of ultra-high voltage (>10kV) SiC IGBTs comprising of an optimized retrograde p-well is investigated. Under extensive TCAD simulations, we show that in addition to offering a robust control on threshold voltage and eliminating punch-through, the retrograde is highly effective in terms of reducing the stress on the gate oxide of ultra-high voltage SiC IGBTs. We show that a 10 kV SiC IGBT comprising of the retrograde p-well exhibits a much-reduced peak electric field in the gate oxide when compared with the counterpart comprising of a conventional p-well. Using an optimized retrograde p-well with depth as shallow as 1 μm, the peak electric field in the gate oxide of a 10kV rated SiC IGBT can be reduced to below 2 MV.cm -1 , a prerequisite to achieve a high-degree of reliability in high-voltage power devices. We therefore propose that the retrograde p-well is highly promising for the development of>10kV SiC IGBTs

Estimating and validating the interbeat intervals of the heart using near-infrared spectroscopy on the human forehead

In studies with near-infrared spectroscopy, the recorded signals contain information on the temporal interbeat intervals of the heart. If this cardiac information is needed exclusively and could directly be extracted, an additional electrocardiography device would be unnecessary. The aim was to estimate these intervals from signals measured with near-infrared spectroscopy with two novel approaches. In one approach, we model the heartbeat oscillations in these signals with a Fourier series where the coefficients and the fundamental frequency can continuously change over time. The time-dependent model parameters are estimated and used to calculate the interbeat intervals. The second approach uses empirical mode decomposition. The signal measured with near-infrared spectroscopy is empirically decomposed into a set of oscillatory components. The sum of a specific subset of them is an estimate of the pure heartbeat signal in which the diastolic peaks and consequential interbeat intervals are detected. We show in simultaneous electrocardiography and near-infrared spectroscopy measurements on 11 subjects (8 men and 3 woman with mean age 32.8 ± 8.1 yr), that the interbeat intervals (and the consequential pulse rate variability measures), estimated using the proposed approaches, are in high agreement with their correspondents from electrocardiography

Optimal edge termination for high oxide reliability aiming 10kV SiC n-IGBTs

The edge termination design strongly affects the ability of a power device to support the desired voltage and its reliable operation. In this paper we present three appropriate termination designs for 10kV n-IGBTs which achieve the desired blocking requirement without the need for deep and expensive implantations. Thus, they improve the ability to fabricate, minimise the cost and reduce the lattice damage due to the high implantation energy. The edge terminations presented are optimised both for achieving the widest immunity to dopant activation and to minimise the electric field at the oxide. Thus, they ensure the long-term reliability of the device. This work has shown that the optimum design for blocking voltage and widest dose window does not necessarily give the best design for reliability. Further, it has been shown that Hybrid Junction Termination Extension structure with Space Modulated Floating Field Rings can give the best result of very high termination efficiency, as high as 99%, the widest doping variation immunity and the lowest electric field in the oxide

Modelling and filtering almost periodic signals by time-varying fourier series with application to near-infrared spectroscopy

We propose a new approach to modelling almost periodic signals and to model-based estimation of such signals from noisy observations. The signal model is based on Fourier series where both the coefficients and the fundamental frequency can continuously change over time. This signal model can be represented by a factor graph which we use to derive message passing algorithms to estimate the time-dependent model parameters from the observed samples

Introducing an Artificial Deazaflavin Cofactor in Escherichia coli and Saccharomyces cerevisiae

[Image: see text] Deazaflavin-dependent whole-cell conversions in well-studied and industrially relevant microorganisms such as Escherichia coli and Saccharomyces cerevisiae have high potential for the biocatalytic production of valuable compounds. The artificial deazaflavin FOP (FO-5′-phosphate) can functionally substitute the natural deazaflavin F(420) and can be synthesized in fewer steps, offering a solution to the limited availability of the latter due to its complex (bio)synthesis. Herein we set out to produce FOP in vivo as a scalable FOP production method and as a means for FOP-mediated whole-cell conversions. Heterologous expression of the riboflavin kinase from Schizosaccharomyces pombe enabled in vivo phosphorylation of FO, which was supplied by either organic synthesis ex vivo, or by a coexpressed FO synthase in vivo, producing FOP in E. coli as well as in S. cerevisiae. Through combined approaches of enzyme engineering as well as optimization of expression systems and growth media, we further improved the in vivo FOP production in both organisms. The improved FOP production yield in E. coli is comparable to the F(420) yield of native F(420)-producing organisms such as Mycobacterium smegmatis, but the former can be achieved in a significantly shorter time frame. Our E. coli expression system has an estimated production rate of 0.078 μmol L(–1) h(–1) and results in an intracellular FOP concentration of about 40 μM, which is high enough to support catalysis. In fact, we demonstrate the successful FOP-mediated whole-cell conversion of ketoisophorone using E. coli cells. In S. cerevisiae, in vivo FOP production by SpRFK using supplied FO was improved through media optimization and enzyme engineering. Through structure-guided enzyme engineering, a SpRFK variant with 7-fold increased catalytic efficiency compared to the wild type was discovered. By using this variant in optimized media conditions, FOP production yield in S. cerevisiae was 20-fold increased compared to the very low initial yield of 0.24 ± 0.04 nmol per g dry biomass. The results show that bacterial and eukaryotic hosts can be engineered to produce the functional deazaflavin cofactor mimic FOP

Combining geometric edge detectors for feature detection

We propose a novel framework for the analysis and modeling of discrete edge filters, based on the notion of signed rays. This framework will allow us to easily deduce the geometric and localization properties of a family of first-order filters, and use this information to design custom filter banks for specific applications. As an example, a set of angle-selective corner detectors is constructed for the detection of buildings in video sequences. This clearly illustrates the merit of the theory for solving practical recognition problems

Indium phosphide photonic circuits on silicon electronics

The intimate integration of photonics and electronics in transceivers facilitates energy-efficiency, bandwidth acceleration and a route to radical miniaturization. We present and implement a wafer-to-wafer integration method which combines electronic and photonic foundry technologies

Facile Stereoselective Reduction of Prochiral Ketones by using an F ₄₂₀-dependent alcohol dehydrogenase

Effective procedures for the synthesis of optically pure alcohols are highly valuable. A commonly employed method involves the biocatalytic reduction of prochiral ketones. This is typically achieved by using nicotinamide cofactor-dependent reductases. In this work, we demonstrate that a rather unexplored class of enzymes can also be used for this. We used an F420-dependent alcohol dehydrogenase (ADF) from Methanoculleus thermophilicus that was found to reduce various ketones to enantiopure alcohols. The respective (S) alcohols were obtained in excellent enantiopurity (>99 % ee). Furthermore, we discovered that the deazaflavoenzyme can be used as a self-sufficient system by merely using a sacrificial cosubstrate (isopropanol) and a catalytic amount of cofactor F420 or the unnatural cofactor FOP to achieve full conversion. This study reveals that deazaflavoenzymes complement the biocatalytic toolbox for enantioselective ketone reductions